S6 60W 30W 18W RGB Outdoor Animation Scan Six Head Laser Bar
Fully customizable OEM solutions for the sixscan laser bar. Engineered with IP66-rated housing, this outdoor laser light offers 30Kpps precision.
View productMatching beam power to a room is easier when the only real difference is the laser module inside one compact body. The X2 platform is a single-output fat beam laser light offered as two builds, and this selector walks through which one fits your venue — short throws in KTV rooms and small bars usually point to the 500 mW option, while a wider club floor is where the 2W RGB beam laser build earns its place. Compare the published figures, then read the room and throw table to land on a model before you ask for a quote.
Three routes into the same two models. Pick the one closest to your project and jump straight to the detail you need.
Every value below is published on the X2 product page. The two options are the same fixture; what changes is the laser module and the configuration code that goes with it.
| Specification | X2-W500 | X2-W2000 |
|---|---|---|
| Description | 500mW RGB Beam laser | 2W RGB Beam laser |
| Configuration | W500C (R200+G100+B200) | W2000C (R500+G400+B1200) |
| Colour | RGB | RGB |
| Effect | One beam RGB effect | One beam RGB effect |
| Channel | 7CH | 7CH |
| Control modes | Auto / master-slave / DMX512 | Auto / master-slave / DMX512 |
| Control interface | 3-pin DMX512 | 3-pin DMX512 |
| Operating voltage | AC100–240V, 50/60Hz | AC100–240V, 50/60Hz |
| Power consumption | 35W or less | 35W or less |
| Working temperature | 0°C to 35°C | 0°C to 35°C |
| Application | Disco, clubs, KTV, pub, bar, family party | Disco, clubs, KTV, pub, bar, family party |
| Packing size | 38.5 × 28 × 43 cm (4-in-1) | 38.5 × 28 × 43 cm (4-in-1) |
| N.W. / G.W. | 4 kg / 6.5 kg | 4 kg / 6.5 kg |
Both builds are quote-based; no price is published on the product page. Bring the table to your RFQ so the model code and quantity are unambiguous.
The X2 is not a multi-aperture bar or a scanning head — it puts out one beam, in RGB. That shapes the design question more than any single number does.
Read across the row that matches your room. The recommendation column only ever points at the two published X2 options — there is no third tier to guess at.
| Venue type | Typical ceiling | Typical throw | Recommended build | Why it fits |
|---|---|---|---|---|
| KTV room / private booth | Under 3 m | Under 5 m | X2-W500 | A private room is short and enclosed, and KTV is one of the listed applications. The 500 mW build is the entry option for that kind of space. |
| Small bar / pub | 3–4 m | 5–8 m | X2-W500 | Bar and pub rooms are both on the published application list. Short throws keep the single beam readable without stacking power. |
| Club floor | 4–6 m | 8–15 m | X2-W2000 | Longer sightlines across a dance floor are where the higher configuration (R500+G400+B1200) is the more sensible starting point. |
| Large hall / long room | 6 m and above | 15 m and above | X2-W2000 | At long throw you are usually planning several units rather than one, so the 2 W build keeps the beam consistent across the room. |
| Rental stock / multi-venue | Varies | Varies | Both | Shared 7-channel layout, shared interface and one packing size make the two builds easy to keep in the same flight case and the same show file. |
Throw is the straight-line distance from the fixture position to the surface or floor area you want the beam to read against — not the room length. Measure it with the rig hung at working height, then match that figure to the row above. Ceiling and throw bands here are planning guidance for typical venue layouts, not published product limits, so confirm the final choice with a haze test in the actual room.
Four things worth settling with your integrator or installer while the model choice is still open.
All three modes are published for both builds. Auto and master-slave let a venue run the fixture without a console on duty; DMX512 hands it to a controller when there is one. Decide which mode the room will actually use on a normal night, not just on show nights.
The published interface is 3-pin DMX512 at 7 channels per fixture. Check what your existing cabling and controller outputs are before you finalise the order, so adapters are not an afterthought on install day.
The published working temperature is 0°C to 35°C, which points to climate-controlled indoor rooms. If the fixture position sits near a door, a terrace or uncontrolled heat, flag it in the quote request.
Packing is listed at 38.5 × 28 × 43 cm in a 4-in-1 carton. Use those figures for truss loading and freight maths when you quote a multi-unit rig rather than a single fixture.
Pricing for the X2 is handled by request, so the fastest route is to arrive with a model code, a quantity and a room description.
Fix the model. Use the room and throw table to choose X2-W500, X2-W2000, or a mix of both for a multi-venue rig.
Add each line to the quote list. The product page carries Get The Latest Quote, Add to Quote List and View Quote List, so several models can sit in one request.
Send the Request More Details form with your name, email and message, plus the verification code — include venue type, throw distance and unit count.
Keep adjacent product options together for a faster catalog comparison.
Fully customizable OEM solutions for the sixscan laser bar. Engineered with IP66-rated housing, this outdoor laser light offers 30Kpps precision.
View product
Professional-grade D1 laser features 360° rotation and IP65 protection. Trusted by laser manufacturers for reliable rgb laser light and outdoor projection.
View product
D8 series rgb laser light solutions provide IP65-rated durability for professional integrators. Sourced from expert laser manufacturers for outdoor events.
View productthey are the same compact single-beam fixture fitted with a different laser module. x2-w500 is listed as a 500 mw rgb beam laser with the w500c configuration (r200+g100+b200); x2-w2000 is listed as the 2 w version with the w2000c configuration (r500+g400+b1200). the remaining published specifications are shared by both.
the smaller indoor applications on the product page — ktv, pub, bar and family party — map most directly to the 500 mw build, because short throws and low ceilings do not call for the higher-power module. use the room and throw table on this page as planning guidance, then confirm with a haze test in the actual room.
each fixture is listed at 7 channels with a 3-pin dmx512 control interface. both model options share that channel count and interface, so a rig can be planned around a single channel footprint even when the two builds are mixed.
yes. the published control modes are auto, master-slave and dmx512. auto play runs without a console, master-slave lets one fixture drive the others, and dmx512 hands control to a desk or software when one is available.
the published figures are ac100–240v at 50/60hz, with power consumption of 35w or less, and a working temperature range of 0°c to 35°c. that range points to climate-controlled indoor venues rather than exposed outdoor positions.
no price is published on the product page. open the x2 page and use get the latest quote or add to quote list, or send the request more details form with your name, email and message. the team is also reachable by email, wechat and whatsapp for project quantities.
